Optipac R410 Hybrid Air/Water oil or gas heat pump

Contents

An environmentally-friendly, high-efficiency solution
Compatible with biofioul F30
What is biofioul F30 ?
An intelligent, connected heat pump
Simple, robust technology that reduces your energy bill
Equipement

Why choose a PERGE Optipac R410 Hybrid gas heat pump? : https://youtu.be/6-tRh3VqpFU

An environmentally-friendly, high-efficiency solution

With hybrid technology, combine energy savings, a smaller carbon footprint and the security of 2 energies without sacrificing comfort

The PERGE OptiPac R410 Hybrid meets all your heating needs in a simple, energy-efficient way.

Year-round, even at slightly sub-zero temperatures, the heat pump supplies energy with unrivalled competitiveness. Under these conditions, its Coefficient of Performance (COP) is highly favorable.
Moreover, hybrid technology, by combining the heat pump with a boiler, makes it possible to use relatively low-power heat pumps (8, 10, 12 or 16 kW) that easily meet needs during this period, and that do not entail any major changes to the electricity subscription.

On extremely cold days, the Eco-Conception*-certified PERGE boiler delivers more economical energy. Its power meets heating needs at the best price without sacrificing comfort.

In between, the appliances complement each other, to satisfy your comfort at the lowest cost.

Combining the two energies allows you to keep the advantages of each and gives you the security of 2 complementary energies while keeping the tank already in place (in the case of Coup de Pouce).

 *European Eco-Conception Directive (High Efficiency & Low NOx Emissions)

Compatible with biofioul F30

PERGE has always invested in innovative technologies, particularly in clean combustion techniques.

This pragmatic approach is based on a process of continuous progress, even minor advances, to improve everyday life for everyone. For example, PERGE OptiPac MR32 hybrid heat pumps are compatible with biofuel.

They can continue to operate with domestic heating oil you may have in your tank. Then, if you decide to switch to biofuel, they can run on the new biocombustible without changing your burner.

What is biofioul F30?

Biofioul F30 is a new kind of energy. It is a biofuel composed of 70% domestic heating oil to which is added 30% renewable energy, in the form of rapeseed methyl ester (RME).

 As a renewable energy source, RME can significantly reduce CO2 emissions, below the 300 g/kWh threshold that will be the maximum permitted from July 1, 2022.

An intelligent, connected heat pump

Connection sécurisée via Bluetooth ou par internet

Communication with the heat pump is via your smartphone, using the app available for Android or IoS. You can connect locally via Bluetooth or remotely via the Internet.

Data exchanges are encrypted for greater security.

Finally, the final word remains with the user, who freely chooses at any time to allow the professional remote access. This access can be :
- granted on a permanent basis, so that the user can monitor his or her installation with complete peace of mind
- limited to occasional interventions by the professional.

RC7, Class VII control

The RC7 control system fitted to OptiPac MR32 hybrid heat pumps is a Class VII control system, acting on the heating circuit temperature simultaneously by :
- modulating it according to outdoor climatic conditions ;
- by adapting and correcting it according to room requirements.

The temperature sensors are easy to install and transmit information either by wire or by radio.

You can control up to 3 heating circuits or 2 heating circuits + domestic hot water production.

There are 4 operating modes :
- Winter (heating + DHW)
- Summer (hot water only)
- Absence (heating at a programmed frost-free temperature)
- Standby (no heating or hot water)

Watch our video tutorials on the MyPerge application, which lets you control your boiler with your smartphone :

Installing MyPerge : https://youtu.be/Aq0sA-a4n7I

Boiler connection : https://youtu.be/fq8r0rGAhF8

Modify your heating system : https://youtu.be/tPPqoTLddlo

Programming heating circuits : https://youtu.be/DLl7249WfQ8

Simple, robust technology that reduces your energy bill

Designed for durability and easy maintenance

The Full Inverter heat pump in the PERGE OptiPac Hybrid uses Immerge coil technology in a large hydraulic volume (100 liters). This technology offers several advantages :

- There's no need to install a buffer tank. Installation is simplified, removal time is reduced and space is saved.

- As they are not subject to a minimum flow rate, they do not require a flow controller or water pressure switch, thus eliminating the risk of potential breakdowns.

- Thanks to this large hydraulic volume, defrosting phases are 5 times faster, for greater savings.

The outdoor unit, with its BlueGold protection of the air/water heat exchanger against weather and salt attack, and the protection of the connector boards and accessibility of the electrical connection boxes, reinforces the feeling of reliability and testifies to a design made to last over time.

Boiler body warranty : 10 years

 
The warranty on the boiler body is extended from 3 to 10 years if you take out an annual maintenance contract with a professional, from the moment the boiler is commissioned and without interruption for 10 years.

Easy installation, with the option of supplying two circuits at different temperatures directly from the PERGE OptiPac R410 Hybrid.

PERGE OptiPac R410 hybrid heat pumps can easily supply 2 heating circuits at different temperatures (e.g. underfloor heating + radiator circuit) directly from the boiler, without the need for additional hydraulic accessories.
This simplifies hydraulic installation and reduces installation times.

Equipement

Hybrid module comprising :

- 50-liter internal hydraulic module and 50-liter boiler mixing chamber for a total buffer volume of 100 liters.
- Transfer pump between hydraulic module and mixing chamber
- Boiler body without mixing valve, allowing operation without return temperature limitation, without risk of dew point inside the boiler body.
- Oil or gas burner
- Circulator circuit n°1 factory fitted
- Control and command panel
- Intelligent, connected RC7 controller. Modulation of power according to outdoor temperature, adaptation and correction based on ambient needs, local control via Bluetooth or remote control via Internet.
- Reinforced insulation casing
- Outdoor unit